147 безплатни аудиофайлове за "High Frequency"

Recording of my finger snap inside my living room. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 48khz using a rode nt1-a condenser microphone. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

This helicopter sound design was created at fl studio, in the sytrus synthesizer. The sound consists of four layers. 1. Sine wave frequency of 44 hz. Simulates the low frequency noise of propeller blades. 2. White noise passed through the svf filter. Simulates the noise of propeller blades. 3. Saw wave. Simulates the sound of an engine. 4. The sine wave. Imitates a high-frequency whistle of the engine. Various modulations are applied to all waves through the envelopes of the synthesizer. Next, the signal on the mixer channel is processed by a multi-band exciter and equalizer. Then a signal was sent to two channels with delay processing. One of them imitates reflections. In the lower-middle frequency range. On the second in the upper-middle frequency range. As you approach the sound source, the volume parameters of the direct and reflected signals are automated, low pass filter, pan width and equalization of direct sound. The helicopter performs strange maneuvers, as if making constant circles during the approach to the listener. I did not seek to create the veracity of these maneuvers.

A fly buzzing around. The thumps are the fly bumping into the wall and a lampshade. This file is dry, so there's some low-frequency garbage from my holding the mic and following the fly. A high pass at around 200hz fixes that. Feel free to use this for whatever you want. 100% public domain.

Recording of an electric kettle boiling water in the kitchen counter of my apartment. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recording of a cardboard being finger scratched. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recording of city ambience from my apartment window at night. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else.

This was created with reaktor 6, nested inside vcvrack (via the "host" module) run through various effects in vcv rack. Ultimately this was rendered out at 192khz (vcv allows for very high super sampling). Many frequencies that are above the range of hearing exist in this file due to rendering it at such a high sample rate. I recommend that, in your daw of choice: pitch this down a couple octaves while running this through a frequency analyzer. Watch how many notes and tones emerge into the range of hearing. You might need a high shelf eq on this as well as a slight high pass filter. Several use cases for this sound: in the background of a sci-fi video game. On your next ambient dark drone top 40 hit single. Run through effects like granulators, pitch shifters and spectral distortions to make a crazy sound design sculpture.

Raw sampled xlive. Exe on a hungarian windows 7 64-bit computer using audacity. The reason why it's only 11khz in frequency range is becaue 44 100 hz makes the sample too high pitched. Also had to make it mono because most of the sound was pushed to the right.

Recording of a button sound from a vintage teac hi-fi stereo amplifier. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recording of a plastic grid which resembles plastic sounding gears. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recording of a small plastic toy ball which, when moved, makes a rain-like sound. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Here's one from a series of 'clang' sounds, great for impact moments in trailers & commercials, or to layer up with other sounds. They are somewhat high-pitch, so they might mix well with low frequency drums and impact sounds. Recorded with tascam dr-40 built-in-mics, by hitting a railing with a pipe in a stairwell and adding a little bit more reverb in daw.

A recording of a backroom with the extractor fans running, the audio is high in pitch/frequency and can be used in instances like machinery rooms, all of my sounds come uncompressed or processed. This means there may be unwanted background noise/ sound that you can remove or not at your will. Equipment used:. Tascam dr40 w/ built in stereo microphone. File information:48,000hz24bit wavstereo.

Doing a test of how this looks on this site. Triangle wave raising octaves in steps. Took 5 tries but got one that im happy with. If you notice at the end the color starts going backward when the frequency gets too high, instead of going towards red. (which is actually the opposite of the wave length ratios in the light spectrum).

Recording of me playing video games on my xbox controller. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Smoke detector test noise, recorded roughly 20cm from mic without room reflections. Fundamental frequency: ca. 3373 hzovertones: ca. 6743 hz; 10111 hz, 13482 hz. Feel free to use this sound; no attribution required. Feel free to write me in the comments what you used this sound for. Equipment:røde ntg2sound devices mixpre-3 ii. File:wavmono48 khz24-bit.

Recording done 25/04/2020 in manizales, caldas. Soundscape of high quality, interior of design studio, preparing implements to draw. Details of recording:height: building 5th floor. Frequency:44. 100recorder: huawei dra-lx3////////////////grabación realizada el 25/04/2020 en manizales, caldaspaisaje sonoro de alta fidelidad, interior de mi estudio de dibujo preparando herramientas para dibujar. Detalle de captura:altura: edificio piso 5frecuencia: 44. 100grabadora: huawei dra-lx3.

Electric sparkle sound made in harmor in flstudio. Sound is made of harmor generating dark, unison, subbas oscilation with three partials with fundamental frequency of 50hz. Partials got decaying amplitude along frequencies. Bass is put into wave shaper with smooth, negative peak distortion at 50% of positive range. Then falls into parametric equalizer boosting 3khz, forming wide parabolic shape. Bass frequencies are cut off. 44. 1khz, 16bit.

Wind turbine sound, near lacedonia, campania, italy, the 16th august 2022 @ 18:30the sound was recorder with a zoom h1n with windshield from a distance of 25m approx from the wind turbine. Processing:* 120hz high pass filter (to reduce some low frequency rumbles due to the wind);* volume adjustment;. Other sound in the recording:* voice of a woman in the distance (at the beginning of the file);* wind gusts;* car passing by (at the end of the file);.

Some generative wildfire sfx made with sunvox. The crackling sounds were made by taking some highpassed white noise, ring modulating it with some more white noise, and then using a noise gate to usilate the loudest 'crackles'. The rumbling was created using lowpassed white noise, and the wind was made by bandpassing white noise with a high resonance and randomly sliding the filter frequency. Everything was sent into a reverb and a stereo expander.

Lazer sound. I made this lazer sound with the use of operator in ableton as well as adding a few effects to help round it out. I started with a basic sine wave and then began to adjust the frequency range to cut out some of the low end of the sound and enhance the high end to make it more realistic and movie accurate. I also had to shorten the decay time so it is more of a short zap sound than a prolonged note. Another step was giving it an initial high pitched sound and this was achieved by having the sound start higher up the scale with semitones and then dropping down giving the effect of shooting and something traveling from the source sound.

This was produced by tapping on a stethoscope which had an earbud pressed against a shure sm57 mic. Low pass filter applied, as well as compression and a gate. Chorus added. Used a recording cassette deck as a preamp going into an m-audio audiophile usb soundcard. Note: if you're having problems listening to this clip, the cutoff frequency of your speaker set may be too high(solution: new speakers). The signal strength exists almost entirely in the very low frequencies, so you may need a sub-woofer to hear it. Otherwise, try turning your speaker volume all the way up. Doing so may saturate the signal and at least allow you to hear the harmonics of the signal caused by the distortion. I don't recommend it, but you'll at least maybe be able to hear something.

This is the stereo file of the 4-ch thunder-file--> https://freesound. Org/s/367222/. The thunder is slow downed to 0,7speed and has now very deep frequencies, which can shake your house, if you have the right equipment to play the file. ;-)the 4 channels are recorded in irt-cross technique so it is a 360° record. Ch1(left) = fl+rlch2(right) = fr+rr. _________________________________________________________________used recording gear:zoom f84 x rode nt1 (without "a" = the black ones).

X and y comes from the nonlinearcircuits sloth lfo (regular version). X is the high sinus c, left channel. Y is the low triangle c, right channel. X and y goes to comparator resulting in a note when crossing the threshold. At the same time x and y goes to cv in on jupiter storm generating two glissando paths. The two used osc's on jupiter storm are tuned to the same pitch. The sloth have a potentiometer that is said to "alter frequency a little". . .

I initially created this snare using lmms ( linux multimedia studio ) and a single instance of the zynaddsubfx plugin. There were many effects and experiments done before exporting as an audio stem. Next i opened this stem ( single snare hit ) in bitwig studio and made a few copies of it and timestretched and chopped and then joined together in a group track the parts i liked to make the whole sound. Final effects included saturation, equalization , sidechain-limiting and compression.

Just tapping things around my desk with a screwdriver and jingling the loose change inside a glass jar. I had the mind to use all of the sounds in this file for a kick/snare/hi hat drum rack in ableton live - hence the ranges of frequency from low (jar thumps) to textured highs (loose change) and high (taps. ) i hope these come in handy, please enjoy! - vanszi. Bandcamp - https://www. Vnzi. Bandcamp. Comspotify - https://open. Spotify. Com/artist/0mzsotvcahcvlcqwo9qndgsoundcloud - https://www. Soundcloud. Com/vanszi.

I found two melodies in gis_sweden's excellent "you deserve it - friday randomness ii"http://freesound. Org/people/gis_sweden/sounds/362508/. And quantized them into a 92 bpm 4/4 thing. Each melody is presented panned, with and without a beat, then simultaneously. It's sort of an accidental counterpoint. I also messed up his nice analog sound into some harsh digital junk. There's a lot of high frequency energy here so watch it, and apologies to mr. Fletcher, mr. Munson and their daughter, curve.

Recording of sea undertow on the beach of formicoli, vibo valentia, calabria, italy, the 19th agust 2022 16:44. The sound was recorder with a zoom h1n with windshield at a short distance from the crashing of the waves on the beach. The waves are driven by a light, gentle wind. The sound was recorded by holding the microphone in my hand while i dived knee-deep into the water and walk, filming the crashing of the waves (also on my legs). High-frequency sound details (the foam of the sea, the impact of waves on each other, etc. ) are much more audible here. Processing:* volume adjustment;* 120hz high pass filter (to reduce low some low frequencies rumble due to the wind);* cut and crossfade to eliminate very few mechanical noise of my hand on the mic;.

Ambient echo sound. This sound required the combination of operator using the triangle wave and plenty of reverb. I layered this sound by using two different octaves to cover most frequency ranges that sounded best and to fill any gaps in the sound effect. This sound is inspired by scene transitions and wide shots where there may be a lack of other sounds so this frees up a space for a calm ambient sound that uses plenty of sustain and reverb. The triangle wave in the operator gave it more of a high pitched calm flowing sound. The other options for example sine wave sounds to harsh and sharp for this type of sound.

Snippets from recordings of me playing the tanpura. The strings are tuned to b, d, g and e, so would work well in the keys of g or e minor. I noticed that my first pack of tanpura samples has a bit of fuzzy white noise so in this pack i have equalized - i reduced all the very high frequencies which got rid of most of the white noise without affecting the low frequency sounds of the tanpura itself. Please note this is the tanpura part of an instrument called the swar sangam which combines the swarmandal (indian harp) and the tanpura, it is not a traditional tanpura and does sound slightly different.

In this sample you hear a recording from inside a well sound insulated room, directly under the roof of a house. Strong rain hints the roof and produces low frequency muted sounds. In the background you hear the constant noise of the rain, coming through the window. There are also a few raindrops hitting the glass of the window. The sample was recorded using the built-in stereo microphone of a zoom h4n recorder. It was slightly processed to remove unwanted low and high frequencies which were not related to the actual recording. If you use this sound, please add a comment or send a private message what you created using it. :-).

I uploaded this after i finish my job (for scoring a music and additional foley/sfx) and by the time for cleaning, i found some of them were not used, were not even reviewed. I have several unused items. As i have benefited several times from this website, it's time to give back. Why not. This was recorded in my home studio, using my condenser microphone, the isk u99 (neumann knock-off, so the seller and a friend said to me; i wouldn't know however. ) powered by apogee duet preamp and simple shock-mount, i hope this recording clean enough for many uses. I recorded in close proximity, hence the high frequency a bit harsh. No edit. No effect. Cheers.

I uploaded this after i finish my job (for scoring a music and additional foley/sfx) and by the time for cleaning, i found some of them were not used, were not even reviewed. I have several unused items. As i have benefited several times from this website, it's time to give back. Why not. This was recorded in my home studio, using my condenser microphone, the isk u99 (neumann knock-off, so the seller and a friend said to me; i wouldn't know however. ) powered by apogee duet preamp and simple shock-mount, i hope this recording clean enough for many uses. I recorded in close proximity, hence the high frequency a bit harsh. No edit. No effect. Cheers.

I uploaded this after i finish my job (for scoring a music and additional foley/sfx) and by the time for cleaning, i found some of them were not used, were not even reviewed. I have several unused items. As i have benefited several times from this website, it's time to give back. Why not. This was recorded in my home studio, using my condenser microphone, the isk u99 (neumann knock-off, so the seller and a friend said to me; i wouldn't know however. ) powered by apogee duet preamp and simple shock-mount, i hope this recording clean enough for many uses. I recorded in close proximity, hence the high frequency a bit harsh. No edit. No effect. Cheers.

I uploaded this after i finish my job (for scoring a music and additional foley/sfx) and by the time for cleaning, i found some of them were not used, were not even reviewed. I have several unused items. As i have benefited several times from this website, it's time to give back. Why not. This was recorded in my home studio, using my condenser microphone, the isk u99 (neumann knock-off, so the seller and a friend said to me; i wouldn't know however. ) powered by apogee duet preamp and simple shock-mount, i hope this recording clean enough for many uses. I recorded in close proximity, hence the high frequency a bit harsh. No edit. No effect. Cheers.

I uploaded this after i finish my job (for scoring a music and additional foley/sfx) and by the time for cleaning, i found some of them were not used, were not even reviewed. I have several unused items. As i have benefited several times from this website, it's time to give back. Why not. This was recorded in my home studio, using my condenser microphone, the isk u99 (neumann knock-off, so the seller and a friend said to me; i wouldn't know however. ) powered by apogee duet preamp and simple shock-mount, i hope this recording clean enough for many uses. I recorded in close proximity, hence the high frequency a bit harsh. No edit. No effect. Cheers.

Snippets from recordings of me playing the tanpura. Tuned to e flat, the notes from top to bottom are b flat, e flat, c, low e flat. In traditional indian tuning the root note in the scale is referred to as sa and is e flat in this scale the fifth note (b flat in this scale) is referred to as pa and the sixth note (c) is dha. I noticed that my first pack of tanpura samples has a bit of fuzzy white noise so in this pack i have equalized - i reduced all the very high frequencies which got rid of most of the white noise without affecting the low frequency sounds of the tanpura itself. Please note this is the tanpura part of an instrument called the swar sangam which combines the swarmandal (indian harp) and the tanpura, it is not a traditional tanpura and does sound slightly different.

This is a recording of an office paper shredder starting up. This model of paper shredder has a button that you can press to run it briefly in reverse, in order to clear paper jams and clean the blades. If the shredder hasn't been used in a while, it takes several seconds to start, and makes a cool noise while doing so. The click at the start of the recording is the switch being pressed. You then hear the motor struggling to start up for about five seconds, and finally it comes up to speed. The high-frequency crackling you hear, particularly once the motor is running smoothly, comes from bits of paper still rolling around in the blades (easy to convert into a campfire or rain). There's another click at the end when the reverse button is released. I uploaded this because several parts of the recording sounded like they'd lend themselves to morphing in various ways to create other interesting noises. Recorded with a hand-held zoom h4n, stereo 96 khz / 24 bits, with the built-in mics, positioned about six inches above the rotating blades of the shredder.

Clean recording of various sounds that would occur when maneuvering around an office space (specifically a desk) and manipulating common office objects. Recording features lots of paper rustling and sliding across a wooden desk, handling pens and a stapler, stuffing manila folders and plastic binders, and towards the end there are some sounds of small-medium sized personal bag being unzipped and zipped and then being filled with some of the office materials. Should work great for filling in general office noises in a scene or reinforcing actions that involve any of the materials featured in the recording. There should be enough variety to allow you to glean more isolated sounds or just use assortments of layered sounds. Recorded with an akg p170 into a tascam 208i audio interface at 48khz/24-bit. Microphone was positioned roughly 1. 5 - 2 feet away from the source. There is some slight room reverb present, which is intentional, and should match common office workspaces well. An 85hz high-pass filter was applied to remove any unintentional, unnatural low-frequency rumbling that may have been picked up during recording.

guardians of limbo (spectral voices, ethereal sounds, odd vocals) sample of fx preset from magnus choir vsti software. Virtual choir (musical instrument). Software description:. Magnus choir is a vst, vst3 and audio unit virtual instrument which can be used to create natural and synthetic choirs. The male and female choruses combine to form a mixed choir, featuring the classic satb (soprano, alto, tenor, bass) structure: women sing soprano and alto, while men sing tenor and bass. Versatile to generate a wide spectrum of choirs, vocal textures, choral pads and voices with modulation capabilities for a new level of realism in digital sound creation. • 54 preset sounds ready to use, including a vast array of natural and synthetic sounds, from oohs, aahs, men and women in mixed choirs to the celestial choir of angels, reso pads, dark atmos, creepy voices, ambient ghostly and birdsong effects, as well as cinematic and soundscapes. 01. - abbey ghost02. - ad infinitum formant03. - ad libitum chorale04. - aeternus lux lucis05. - alchemical signals06. - angelic vox07. - angels between us08. - apocalyptic chamber09. - astral singers10. - aurum vox pad11. - birds sonic sweep12. - caelestis kingdom13. - celestial choir14. - choral ensemble15. - choralis pad16. - cinematic padilius17. - cosmic odyssey voice18. - cryogenic dimension19. - dark cantus20. - digital voice21. - dystopian chorus22. - elves land23. - enchanted goblins24. - ethereal voices25. - guardians of limbo26. - lost souls in the dark27. - male & female aahs28. - morph dreams29. - morphed vowels30. - mystical vowels31. - nebula dark atmos32. - necromancer summons33. - neo choir34. - octave aahs choir35. - octave vox pad36. - oniric sequences37. - oohs choir38. - psychedelic vox39. - psychomanteum reso40. - quasi spatial voices41. - relaxing paradise42. - restless spirits43. - sanctus holy chant44. - sonorous skies45. - sopranvox c4-c646. - spatiotemporal atmos47. - spectral hell48. - synthetic chorus49. - synthesized vocals50. - underworld embryos51. - vinyl chorus52. - voices in the mist53. - vowelled soundscape54. - vox vocis texture. • low frequency oscillator section: these knobs apply modulation to the selected instrument. By using the lfo to modulate various aspects of the audio signal, you can apply effects such as vibrato or tremolo. • adsr envelope generator with attack, sustain, decay and release parameters. • pitch bend: the pitch bend knob directly changes the pitch of the selected instrument. • reverb built-in: provides a spaciousness and depth to simulate the sound reflections from walls, floors and ceilings following a sound created in an acoustically reflective environment. Small rooms can be modeled as well as large spaces. • filter section: with filter type box for low pass filter and high pass filter. • amplitude range parameters: it controls the loudness, the way in which we perceive amplitude. The sensitivity level is set by the user. • panning potentiometer control. • midi cc automation: implementation of midi continuous controller parameters for use with external hardware control via daw.